Best Table Saw: Every Workshop Needs One

Last updated on:

Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories - RK7323
Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle
SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
Bosch Power Tools 4100-10 Tablesaw - 10 inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Stand
SKILSAW SPT99-11 10" Heavy Duty Worm Drive Table Saw with Stand, Silver
SCW’s Score
9.1
8.9
8.5
8.2
7.9
MSRP
from $94.02
$349.00
$346.66
from $594.42
$625.00
Weight
17 lbs
57.3 lbs
49 lbs
60 lbs
94.3 lbs
Size
16.1” x 17.5” x 8.3”
26” x 24.75” x 15.5”
19.9” x 23.4” x 13.4”
29” x 32” x 13.25”
52.6” x 29.5” x 35.1”
Power
5,000 RPM
5,000 RPM
5,300 RPM
3,650 RPM
5,000 RPM
Capacity
18”
18”
26”
25”
30.5”
Extra Features
Three-year warranty, vacuum port
One-handed carry handle, all-steel base, precise angle markers
Extended blade guard, anti-kickback device
Full tool kit, transparent blade guard, soft circuitry
Kickstands, six-month full refund, anti-kickback
Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories - RK7323
SCW’s Score
9.1
MSRP
from $94.02
Weight
17 lbs
Size
16.1” x 17.5” x 8.3”
Power
5,000 RPM
Capacity
18”
Extra Features
Three-year warranty, vacuum port
More Information
Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle
SCW’s Score
8.9
MSRP
$349.00
Weight
57.3 lbs
Size
26” x 24.75” x 15.5”
Power
5,000 RPM
Capacity
18”
Extra Features
One-handed carry handle, all-steel base, precise angle markers
More Information
SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
SCW’s Score
8.5
MSRP
$346.66
Weight
49 lbs
Size
19.9” x 23.4” x 13.4”
Power
5,300 RPM
Capacity
26”
Extra Features
Extended blade guard, anti-kickback device
More Information
Bosch Power Tools 4100-10 Tablesaw - 10 inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Stand
SCW’s Score
8.2
MSRP
from $594.42
Weight
60 lbs
Size
29” x 32” x 13.25”
Power
3,650 RPM
Capacity
25”
Extra Features
Full tool kit, transparent blade guard, soft circuitry
More Information
SKILSAW SPT99-11 10" Heavy Duty Worm Drive Table Saw with Stand, Silver
SCW’s Score
7.9
MSRP
$625.00
Weight
94.3 lbs
Size
52.6” x 29.5” x 35.1”
Power
5,000 RPM
Capacity
30.5”
Extra Features
Kickstands, six-month full refund, anti-kickback
More Information

If you didn’t take wood shop in high school, then you never got to experience the power of a table saw. 

Built for just about every project, your table saw is the one major stationary piece of hardware in your workshop that you should always be able to rely on. 

We’ve compiled table saw reviews on the five best tested models, accounting for surface space, materials, and saw power. 

The best table saw for your specific needs is waiting below—pore over our reviews, and continue on to our in-depth expertise on table saws to better determine your ideal model.

Our Reviews Of The Best Table Saw

#1

Rockwell BladeRunner X2

BEST TABLETOP

Your table saw is about to be a little less of a table. 

Unlike most heavy and stationary pieces, this lightweight portable table saw goes with you to the project, no matter where that may be. 

Apart from its excellent compact weight, you get traction padding on the bottom of each foot to grip the surface that it’s being laid down on.

There’s even a three-year manufacturer warranty to cover things like that, as well as the large rip fence. 

Apart from its price, Rockwell’s BladeRunner X2 captures exactly what we’re all looking for in a table saw: more power. 

There’s a 6.5 amp motor that takes care of everything, grinding and gliding through whatever comes its way. PVC pipe, aluminum, wood; you name it.

But as they say, they get what you pay for. It’s a great unit, but it does come with its own series of flaws. First and foremost is the small amount of space. 

This table saw’s surface is good if you’re cutting wood that’s less than about two feet, and even then it’s going to over hang quite a bit during cutting. 

It’s not designed for carpenters or those of you looking to take it on a jobsite; it’s a compact, miniature table saw that saves you space and money.

It’s a small project tool, but it still comes with a few extra perks. 

Those include the ultra fast blade swap-out system, allowing you to change those dull blades for new sharp ones in as little as three seconds. 

Pop it up on a shelf when not in use. It’s ideal if you have little ones that can get into your shop; there’s no open machinery out and about, and everyone stays safe.

Technical specifications

  • Weight: 17 lbs
  • Size: 16.1” x 17.5” x 8.3”
  • Power: 5,000 RPM
  • Capacity: 18”
  • Extra Features: Three-year warranty, vacuum port
#2

Bosch Portable Jobsite Table Saw

BEST PORTABLE

Bosch Portable Jobsite Table Saw

Bosch comes up whenever you’re discussing tools, and for good reason: they knock it out of the park every single time. 

Their portable jobsite table saw has a lot of power in the 5,000 RPM motor, and an all-steel base to stay good and stable during use. 

There’s even a one-handed carry handle on the side, though you should be warned that it’s nearly 60 lbs of weight that you’ll be lugging around.

With an 18” capacity, you have enough versatility to use it across the board for plenty of projects. 

Bosch offers a thirty-day money-back guarantee, as well as a one-year warranty if you end up running into any manufactured problems. 

Even the great giants like Bosch can’t avoid their fair share of problems though, and one of those include a loosening clamp.

It’s something you have to pay attention to prior to each use, and that’s a bit of a pain. 

When it comes time to repair this unit after three to five years of use, it’s going to run you a pretty penny. 

Users have reported costs around 40% of the original buying price for repairs, or around 27% if they do it themselves. That’s definitely something to consider before buying.

The bottom line is that Bosch created something powerful and portable, with enhanced stability that other portable units seem to be lacking. 

Vibrations won’t be an issue thanks to that steel base, so you can glide through wood like it’s nothing. 

What’s more is that you get a whole kit with your purchase, and it includes push sticks, spare blades, and more.

Technical specifications

  • Weight: 57.3 lbs
  • Size: 26” x 24.75” x 15.5”
  • Power: 5,000 RPM
  • Capacity: 18”
  • Extra Features: One-handed carry handle, all-steel base, precise angle markers
#3

Skilsaw SPT70WT Portable Worm Drive Table Saw

Skilsaw SPT70WT Portable Worm Drive Table Saw

Skilsaw tried to hover somewhere between portable and semi-permanent, and they hit most of those marks. 

For one, you get an extended blade guard with an anti-kickback device. 

Nearly 40,000 table saw injuries are reported every single year, and a hefty number of those are directly related to kickback.

This is excellent for shaping your own lumber, but it’s not technically a woodworker’s saw. 

It’s more meant for general construction where you’ll be cutting through a lot of stuff throughout your day, from PVC to aluminum sheets and all that. 

You can still get your raw lumber down to a good size, and use a different tool to fine-tune the edges before you begin woodworking with it.

The problem is, the second you open the box, you’re going to have to make adjustments to just about everything you pull out. 

The fence doesn’t always come square to the blade, bevels need to be adjusted, and an overall maintenance check before you begin using it. 

That’s not exactly the most excitable unboxing of your life, but the power of the saw still stands.

There’s a ton of accessories that come with this, as well as a vacuum attachment that’s designed to give you a little more clarity throughout your time spent using it. 

With a durable aluminum construction and an extremely long life on the motor, it’s not going to quit on you, it just won’t be as good for small adjustments to bits of wood.

Technical specifications

  • Weight: 49 lbs
  • Size: 19.9” x 23.4” x 13.4”
  • Power: 5,300 RPM
  • Capacity: 26”
  • Extra Features: Extended blade guard, anti-kickback device
#4

Bosch 4100-10 Jobsite Table Saw

BEST WITH STAND

Bosch 4100-10 Jobsite Table Saw

Bosch is back at it, and this one was a toughie. There’s a few reasons that it didn’t peak the top of the list (such as the price), but we were initially rooting for it. 

The 4100-10 model is a work of beauty, featuring anti-kickback guards, and a fully transparent blade guard that gives you uninhibited visibility over everything you’re doing.

The first spot that it fell flat on was the RPM: a whopping 3,650 doesn’t really catch your eye, but they did it for a reason. 

There’s soft circuitry at play here, which means it won’t overheat or trip a breaker when you go to fire it up. 

It still manages to have a zero motor, so you won’t have to wait for it to fire up, but they just managed it in a much better way.

There’s even 15 amps of power behind that, which is difficult for a motor of that RPM. It will cut through just about anything you slip across the table, within reason. 

You get an easy pull handle and a set of tires to wheel it around on, which is good, because this thing weighs 60 lbs. 

Mobility is the main factor here, but unlike other mobile units we’ve seen, this does have the intricacy to be used with woodworking.

Bosch also includes a full tool kit with your purchase. 

You get a blade wrench, adjustment wrench, miter gauge, and a few more components that help you manage absolutely everything. 

As Bosch is known for, their unit comes in pristine condition right out of the container, so there’s no need to tighten anything before you get started.

Technical specifications

  • Weight: 60 lbs
  • Size: 29” x 32” x 13.25”
  • Power: 3,650 RPM
  • Capacity: 25”
  • Extra Features: Full tool kit, transparent blade guard, soft circuitry
#5

Skilsaw SPT99 Heavy Duty Table Saw

Skilsaw SPT99 Heavy Duty Table Saw

It’s the priciest on the list, but it’s the absolute best with the full stand that it comes on. It’s technically portable, but then again, if it isn’t held to the floor with concrete then it’s portable. 

It weighs nearly a hundred pounds, but comes with a full stand and  two solid wheels to maneuver it from spot to spot. 

Skilsaw made this uniquely brilliant for carpenters and woodworkers alike, so you can get some close detail without struggling with this thing.

The motor hits 5,000 RPM, which is enough for what you’d expect to use this table for. 

We were delighted at the stopping power behind the kickstands, as well as the total capacity of over thirty inches. 

That being said, it’s a good table, but Skilsaw could have done with providing better assembly instructions. 

It’s a bit all over the place, which makes for a messy installation process. They’re also known for fantastic customer service. 

From time to time, a blade or tool has been missing from the kit, and Skilsaw ships it right out to the customer with no questions asked, no wait required. 

They put the same level of attention to detail into the blade guard, as well as the anti-kickback function right behind it.

Use the outfeed to handle larger pieces of wood, with or without the help of someone else. 

The fence lock is decent enough right out of the box, but it does warp a bit with time, so beware or easy breaking. 

Other than that, it’s a solid unit (and it had better be for the price they’re asking). If you want to get serious about woodworking, this could be the last table saw you’ll ever need to buy.

Technical specifications

  • Weight: 94.3 lbs
  • Size: 52.6” x 29.5” x 35.1”
  • Power: 5,000 RPM
  • Capacity: 30.5”
  • Extra Features: Kickstands, six-month full refund, anti-kickback

Table Saw FAQ

You’ve seen the cream of the crop, but now it’s time to find out how to maintain those bad boys so they don’t run dull or get damaged. 

We’ve answered some of your burning questions regarding table saws, so you’ll be fully equipped to make a purchase decision soon enough.

What Can a Table Saw be Used for?

Even if you opt for the best small table saw, they’re all designed to cut big pieces of wood. Plywood sheets, baseboards, even PVC and aluminum. 

A table saw is seen as the ultimate necessity in any woodworkers shop, and the top tool in a carpenters arsenal.

They’re alternatives to hand saws, jigsaws, miters, circular saws, and a sawzall for that matter. 

While you might find it easier to use one of the aforementioned saw types for some jobs, a table saw can likely perform the same exact task, and even save you a bit of time in the process.

Table saws have different capacities, which we’ll talk about in a minute. Depending on the size of the blades it uses and the RPM in the motor, some could be more powerful than others. 

The right pick for you will all depend on your needs.

Can the Table Saw Cut Wet Wood?

Cutting Wet Wood On Table Saw

Even the best beginner table saw can slice right through wet wood, but that doesn’t necessarily mean it needs to. 

You’re supposed to dry wood out properly before you start cutting it. 

When wood is wet, the fibers stick straight up, and the wood itself expands from water and general moisture retention. That’s not good for the wood.

Your table saw could slice through your boot if you popped it up there, so it can definitely cut through wet wood. 

There are reasons why you don’t want to slice through wet wood, though. One of them include mucking up your blades. 

They won’t run dull from slicing through a more malleable material, but they will get wet wood fibers and gunk lodged in between the blades. 

Then you have to clean them, and then it’s just a whole mess.

So while your table saw will cut through wet wood, there’s no reason why you’d want to do it. The wood isn’t going to be properly usable anyway.

What’s the Difference Between a Miter and a Table Saw?

Two Different Saws

Miter saws are designed to cut at an angle most of the time. 

There’s a wide range of motion that you have, and the saw is on a stand that allows you to confidently pull it up, slide the wood beneath its blade striking zone, and lower it onto the wood. 

The good thing about these is that there is relatively no kickback to worry about (and they account for a fraction of woodworking injuries compared to table saws).

Table saws are wide open blades in the middle of the table that you bring the wood to. 

You’re not going to use a table saw for 45° angle d cuts, but you are going to use it to trim that sheet of plywood down into usable bits. 

They each serve their own purpose, and come in wildly different price ranges despite using similar-sized blades. 

A miter saw is optional, bit a table saw is basically a necessity. You can replace a miter saw with a circular saw, so long as it can achieve a 45° angle through its bevel.

What Are Different Types of Table Saws?

Threee Tabletop Saw Models

Portable Table Saw

Most of the table saws on this list are portable. 

A portable unit is often seen as the best table saw for woodworking, primarily because it can be put away if you have children or pets that come through the garage when you’re not using it. 

Portable units feature smaller capacities, but often have motors and an RPM rating that rival benchtop and jobsite table saws. 

The benefits of a portable table saw for woodworking are short, but if you’re dually using this for work, it could come in handy. 

As you might imagine, portable means smaller and lighter; it’s no wonder why people see portable units as the best table saw for the money.

Benchtop Table Saw

Rivaling the functionality of a portable table saw, a benchtop table saw does exactly what you’re thinking it does—it sits on a bench. 

You get about the same surface size as a portable unit, and in some cases even less space to work. 

These are lightweight, portable (to an extent), but usually very topheavy. You’ll also notice that the saw blade runs down from the unit, and generally looks like a jigsaw. 

It’s an odd selection for a table saw since it gives less mobility and maneuverability with your hands, but it still gets the job done.

Jobsite Table Saw

A big, portable unit with a high RPM, and a built-in metal bench that goes with you. Jobsite table saws, much like the Skilsaw unit we reviewed, have their own place. 

It’s better than building a custom table saw in your workshop, but you’re at the mercy of the table height forever and always. 

They’re rarely adjustable. These are the units where you’ll find dust collection chambers and hoses for vacuums, as well as riving knives. 

Jobsite table saws are called what they are, because contractors know these can take a beating from hell, and keep on kicking.

What is the Rip Capacity of the Table Saw?

The rip capacity determines the distance from the edge of the blade, to the edge of the fence. If you’re trying to cut a large plywood board, you’ll need a lot of clearance or capacity. 

However, this is where a circular saw or miter saw might outdo a table saw. 

If you get an in-home table saw, such as a custom one, there’s going to be a lot more surface space and as much rip capacity as you want. 

But since we’re talking about buying one, just keep your project in mind.

You’ll notice that the best inexpensive table saw still comes with a fairly big rip capacity. Scale depending on your project. 

The rip capacity is important because you can’t just surpass it without messing up proper angles and cuts in the wood. 

Unless you’re building a house from scratch and slicing through the plywood boards yourself, a 30.5” capacity (like on our last pick) will suit all of your needs properly.

How Dangerous Are Table Saws?

They’re one of the most dangerous pieces of woodworking machinery that you’ll ever own. 

They account for almost half of all woodworking-related injuries, but they are necessary to get the job done right

Since these spin at ridiculous rates, you don’t want your finger to come anywhere near close to the blade. Instead, you’ll use a push stick.

The number one injury with table saws come from kickback: the blade severs a small bit of wood from a larger piece that’s rather lightweight, and the friction caused by the blade sends it hurling back towards the woodworker. 

This is why it’s important to have grip pads, push sticks, and other safety equipment in your workshop.

Slice and Dice, Day and Night

Whether you need the best jobsite table saw or one for your personal workshop, you’ve just found one here. 

Between brands, space, durability and longevity, each of these table saws will continuously guide you through your woodworking projects like an absolute champion. 

We know it’s difficult to choose between these great picks, so be sure to thoroughly read the buying guide before making an informed decision. Happy woodworking!

Did you like the article? Please rate it:

Be first to rate

You Might also like